Kase™ Load Coil Cases
Kwik Kase Load Coil Cases take advantage of the modular
design of Charles load coils. A U-shaped design (2/3 enclosed ABS plastic
tube) allows coils to be easily snapped into or out of the case. This
intelligent modular design allows for future expansion with minimal
service needs. Technicians just need snap in additional coils when needed.
Kwik Kases mount to enclosure backboards with provided bolting hardware.
Kases come equipped with mini 88mH coils, although other inductances may
be special ordered. Available coil counts are 1, 2, 3, 4, 5, 6, 10, 11,
12, 15, 16, 18, 20, 24 and 25.
Access Load Coil Cases
Access Load Coil Cases are designed for use in splice cases, buried plant
housings and ready access closures. All Charles single load coils are
modular in design. Load coils are assembled in an ABS plastic tube and
totally encapsulated with a polyurethane compound. Tie straps are included
for convenient mounting to enclosure backboards.
case is provided with fully color coded, band stripped, 36” long plastic
insulated copper conductors which are compatible with filled cable. The
leads are grouped IN and OUT with matching pair colors in the IN and OUT
groups corresponding to the same coil.
Ready Access Load Coil Cases come equipped with mini 88mH coils,
although other inductances may be special ordered. Available coil counts
are 3, 5, 6, 10, 11, 12, 16, 18 and 25.
Load Coil Cases
Load Coil Cases are both versatile and convenient. These cases are truly
universal, with mounting options for utility power, aerial strands, and
manholes in addition to direct burial installation. With the ability to
house from 25 to 3,600 load coils, Universal Load Coil Cases are the
convenient way to place line conditioning components wherever they are
needed in the local loop.
Rugged polyethylene case enclosures provide optimal protection against all
weather conditions, ground acids and corrosive elements in the
environment. Their compact size and light weight enables a reduction in
installation costs and reduces shipping and handling charges. Underground
manhole rebuilding requirements can be reduced dramatically.
provided stubbing cable is constructed of PASP type plastic with insulated
color-coded conductors. Standard stub length is 10 feet, although any
length may be special ordered. The connection between the stub and load
coil case is physically bonded, providing both strain relief and a
weather-resistant seal. Positive moisture and pressure dam is affected in
the neck of the case by a unique vacuum process, drawing the damming
compound into the stub. This eliminates moisture propagation into the
case. Preconnectorized cable ends are available.
All cases are hermetically sealed with a special chemical bonding process.
For additional strength and security all case component joints are welded
and double sealed. Internal flooding of the entire case with
non-hydroscopic urethane provides dielectric integrity and resistance to
moisture, thermal shock and impact.
Load Coil Datasheet (.pdf)