|
CABLE
STUBS
|
|
|
Charles
Industries C-10 type cable stubs are fully color-coded PIC cable with either
ALPETH (C-10A1) or PASP (C-10B1) sheaths. C-10 cable stubs contain a gas plug
10 from one end. These stubs are designed as an interface between two
pressurized or non-pressurized cables to keep them separated pneumatically. They
can also be used at control points and access points in dedicated plant, or for
joining and rearranging existing plant. A wide variety of cable pair count sizes
is available (50 to 3600 pair).
C-10
cable stubs are available in standard 20 lengths or can be increased by 10
increments to any length desired. As an optional feature, either one or both
ends of the cable stub can be connectorized with MS2 or 710 type connectors. For
buried applications, stubs can be filled with D Encapsulant (C-10D1) at
one end for added protection (not to exceed 30).
All cables are 100% tested and individually packed for ease of handling. A
weatherproof identification label is affixed to the gas plug.
| Standard Sizes | Gas Plug Dimensions (Diameter x Length) | |
| (Pair Count) | C-10A1 | C-10B1 |
| 50 Pair | 1.60 x 18 | 1.80 x 27 |
| 100 Pair | 1.85 x 18 | 2.00 x 27 |
| 200 Pair | 2.10 x 18 | 2.20 x 27 |
| 300 Pair | 2.20 x 18 | 2.30 x 27 |
| 400 Pair | 2.35 x 18 | 2.45 x 27 |
| 600 Pair | 2.70 x 18 | 2.80 x 27 |
| 900 Pair | 2.95 x 18 | 3.05
x 27 |
| 1200 Pair | 3.20 x 18 | 3.30 x 27 |
| 1500 Pair | 3.05 x 18 | 3.10 x 27 |
| 1800 Pair | 3.20 x 18 | 3.30 x 27 |
| 2100 Pair | 3.35 x 18 | 3.45 x 27 |
| 2400 Pair | 3.40 x 18 | 3.50 x 27 |
| 2700 Pair | 3.55 x 18 | 3.65 x 27 |
| 3000 Pair | 3.70 x 18 | 3.80 x 27 |
| 3600 Pair | 4.00 x 18 | 4.10 x 27 |
|
|
|
|
Charles
Industries EP-10 type cable stubs are fully color-coded PIC cable with either
ALPETH (EP-10A1) or PASP (EP-10B1) sheaths. EP-10 cable stubs contain a gas plug
10 from one end.
The individual insulated conductors are exposed for a length of 24 beyond the
gas plug for splicing purposes. Also provided is a #10 insulated ground lead
from the gas plug that is bonded to the cable shield. This cable stub is
designed to serve as a conducting interface between a pressurized cable and a
non-pressurized ready access splice closure or has application with a lead
sleeve.
EP-10
cable stubs are available in a wide range of cable pair count sizes (50 to 3600
pairs). As an optional feature, either one or both ends of the cable stub can be
connect-orized with MS2 or 710 type connectors. For buried applications,
grease-filled stubs can be provided for added protection (EP-10A1-F)
All
cables are 100% tested and individually packed for ease of handling. A
weatherproof identification label is affixed to the gas plug. When dealing with
lead sleeve applications, you must specify that a lead sleeve adapter is
required.
| Standard Sizes | Gas Plug Dimensions (Diameter x Length) | |
| (Pair Count) | C-10A1 | C-10B1 |
| 50 Pair | 1.70 x 7 | 1.90 x 7 |
| 100 Pair | 1.90 x 7 | 2.40 x 7 |
| 200 Pair | 2.40 x 7 | 2.40 x 7 |
| 300 Pair | 2.40 x 7 | 2.90 x 7 |
| 400 Pair | 2.90 x 7 | 2.90 x 7 |
| 600 Pair | 2.90 x 7 | 3.60 x 7 |
| 800 Pair | 3.60 x 7 | 3.60
x 9 |
| 900 Pair | 3.60 x 9 | 3.60 x 9 |
| 1200 Pair | 4.00 x 10 | 4.00 x 10 |
Note
on Wire Gauges
ALPETH:
24GA thru 1200 pair, 26GA 1500 pair and over
PASP:
24GA thru 600 pair, 26GA 900 pair and over