|
2000 SP Series Marine Electronic Battery Chargers
12 Volt - 10, 15, 20, 30, 40 & 50 AMP
2000 SP Series Marine Electronic Battery Chargers are an
excellent choice for value-priced, high performance DC charging. This
Series units include a battery type selector switch allowing you to
charge Lead Acid, GEL or AGM batteries. 3-stage charging
delivers the greatest charge when the battery is most able to accept
it, preventing overcharging and extending battery life. Units
restore up to 3 banks simultaneously.
Other features include the ability to act as a power supply,
ignition and reverse-polarity protected, easy-to-read DC ammeter,
corrosion-resistant components and housing, and a heavy-duty heat
sink design. Exterior slots allow for easy mounting.
2-year limited manufacturer's warranty. Made in the USA.
Multi-step charging provides maximum
efficiency
- Restores up to 3 individual battery banks
simultaneously
- Prevents overcharging and damage, extending
the life of the battery
Durable, corrosion-resistant housing and
components
- Constructed of tough, anodized aluminum housing that stands
up to the elements-including extreme heat, humidity and salt air
- Circuit boards with UL-recommended coatings provide the
ultimate in environmental protection and hydrolyte stability-meets requirements of
MIL-1-46058C
Runs cool and quiet at full capacity
- Effective heat sink eliminates the need for cooling fans on
lower wattage units
- Designed for low emissions to
run EMI/RFI interference free
Easy to install and service
- Battery selector switch allows
charger to be used with lead acid, gel, or AGM batteries
- Exterior slots for easy mounting
- Easy access to terminal connections and fuses
- 2 Year warranty, made in the
USA
|
Specifications |
|
|
| Charles
Part Number |
Amperage |
AC
Input Voltage Range |
DC
Output Voltage Range |
Frequency |
Dimensions |
| 93-12102SP-A |
10 |
95-140
VAC |
12V |
50Hz
or 60Hz |
3.7"
x 9.5" x 10.5" |
| 93-12152SP-A |
15 |
95-140
VAC |
12V |
50Hz
or 60Hz |
3.7"
x 9.5" x 10.5" |
| 93-12202SP-A |
20 |
95-140
VAC |
12V |
50Hz
or 60Hz |
3.7"
x 9.5" x 10.5" |
| 93-12302SP-A |
30 |
95-140
VAC |
12V |
50Hz
or 60Hz |
3.7"
x 9.5" x 10.5" |
| 93-12402SP-A |
40 |
95-140
VAC |
12V |
50Hz
or 60Hz |
3.7"
x 9.5" x 10.5" |
| 93-12502SP-A |
50 |
95-140
VAC |
12V |
50Hz
or 60Hz |
3.7"
x 9.5" x 13.25" |
| 21-104589-0 |
Dripshield
for 2000 SP Series Models |
|
|
|
